Our strength lies in the quality

Your direct line

+49 8435 150

2-AXLE 3-SIDED TIPPER

RD-8000

Total weight:8.000 kg
Empty weight:ca. 2.120 kg
Bridge size:ca. 4.500 x 2.000 mm
Board height:ca. 500 mm
Top speed:40 km/h version with authorization papers for 25 km/h for agricultural and forestry
Base data:
Total weight:8.000 kg
Front weight/Support load:4.000 kg
Rear weight/Axel load:4.000 kg
Empty weight:ca. 2.120 kg
Payload:ca. 5.880 kg
 
Construction:
Bridge size:ca. 4.500 x 2.000 mm
Board height:ca. 500 mm
Pendulum head height:ca. 500 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.120 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:40 km/h version with authorization papers for 25 km/h for agricultural and forestry
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Stop for the rear gate.


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


2 Wheel compressed air-brake.




Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.




Axle track approx. 1.650 mm; platform widt happrox.. 2.100/2.200 mm



Suspension VB-09/1065/325 with offroad axle regulation.




Hydraulic connection for the second trailer

Handle about a 3-way gate valve


DM 105 mm / 4-stage / approx. 1,700 mm
Recommended for Forestry!


Gates 500 mm high.

Only in combination with:
- 9400081 chain with hole and screw


Attachment gate 600 mm instead of 500 mm

Only in combination with:
- 9400081 chain with hole and screw


Slide with hand-lever and lockable pipe-leak

Only tipping with swinging back panel.


Plugged outlet-hopper


Lifting springs - 1 piece on both side

RD-80

Total weight:8.000 kg
Empty weight:ca. 2.060 kg
Bridge size:ca. 4.500 x 2.200 mm
Board height:ca. 500 mm
Top speed:40 km/h version with authorization papers for 25 km/h for agricultural and forestry
Base data:
Total weight:8.000 kg
Front weight/Support load:4.000 kg
Rear weight/Axel load:4.000 kg
Empty weight:ca. 2.060 kg
Payload:ca. 5.940 kg
 
Construction:
Bridge size:ca. 4.500 x 2.200 mm
Board height:ca. 500 mm
Pendulum head height:ca. 500 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):1.230 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:40 km/h version with authorization papers for 25 km/h for agricultural and forestry
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Stop for the rear gate.


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


2 Wheel compressed air-brake.




Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.



25 km / h version, 4-wheel automatic retraction and compressed air 2-wire with manual control
Adm. Total weight for automatic retraction 8,000 kg
Adm. Total weight for compressed air brake 10,000 kg
Incl. German approval documents


10.000 kg total weight




Suspension VB-09/1065/325 with offroad axle regulation.



Brake-connector for second trailer (2-conductor)


Spring parking brake with double release and overload protection valve


Duomatic-brake connection

In place of standard connections


4 Wheel compressed air-brake.


Hydraulic connection for the second trailer

Handle about a 3-way gate valve


Back-tilt stabilizer (RKS)


Base gate 600 mm instead of 500 mm

Only in combination with:
- 9400081 chain with hole and screw


Attachment gate 600 mm instead of 500 mm


Slide with hand-lever and lockable pipe-leak

Only tipping with swinging back panel.


Plugged outlet-hopper


Lifting springs - 1 piece on both side


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on one side a aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner
- Only for body length up to 4.500 mm


Tarpaulin-attachement on the left side with expander (4 pieces)


RD-130

Total weight:13.000 kg
Empty weight:ca. 3.100 kg
Bridge size:ca. 4.500 x 2.300 mm
Board height:ca. 600 mm
Top speed:40 km/h version with authorization papers for agricultural and forestry
Base data:
Total weight:13.000 kg
Front weight/Support load:6.500 kg
Rear weight/Axel load:6.500 kg
Empty weight:ca. 3.100 kg
Payload:ca. 9.900 kg
 
Construction:
Bridge size:ca. 4.500 x 2.300 mm
Board height:ca. 600 mm
Pendulum head height:ca. 600 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.290 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:40 km/h version with authorization papers for agricultural and forestry
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Stop for the rear gate.


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


Spring parking brake with double release and overload protection valve


4 Wheel compressed air-brake.




Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chain of gate with continuous walls (swinging and folding, without loosening the chain)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.


14.000 kg total weight - 40 Km/h.




Brake-connector for second trailer (2-conductor)


Duomatic-brake connection

In place of standard connections


Automatic load sensing valve (ALB) on both axles




Hydraulic connection for the second trailer

Handle about a 3-way gate valve


Slide with hand-lever and lockable pipe-leak

Only tipping with swinging back panel.


Plugged outlet-hopper


Lifting springs - 1 piece on both side


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on one side a aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner
- Only for body length up to 4.500 mm


Tarpaulin-attachement on the left side with expander (4 pieces)

RD-150

Total weight:15.000 kg
Empty weight:ca. 3.440 kg
Bridge size:ca. 4.800 x 2.300 mm
Board height:ca. 600 mm
Top speed:40 km/h version with authorization papers for agricultural and forestry
Base data:
Total weight:15.000 kg
Front weight/Support load:7.500 kg
Rear weight/Axel load:7.500 kg
Empty weight:ca. 3.440 kg
Payload:ca. 11.560 kg
 
Construction:
Bridge size:ca. 4.800 x 2.300 mm
Board height:ca. 600 mm
Pendulum head height:ca. 600 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.350 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:40 km/h version with authorization papers for agricultural and forestry
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Bolt underride protection, galvanized, with separate lighting sources in a protected position on the vehicle frame. Fender bracket and luminaire support in galvanized bolt


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


Spring parking brake with double release and overload protection valve


4 Wheel compressed air-brake.



Hard chrome- plated hydraulic cylinder with lift-valve and shut-off


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chain of gate with continuous walls (swinging and folding, without loosening the chain)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.


Stop for the rear gate.

Essential for tipping backwards in combination with a opend rear gate.




Brake-connector for second trailer (2-conductor)


Duomatic-brake connection

In place of standard connections


Automatic load sensing valve (ALB) on both axles




Hydraulic connection for the second trailer

Handle about a 3-way gate valve


Lifting springs - 1 piece on both side


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on one side a aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner
- Only for body length up to 4.500 mm


Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner (2 pieces)

RD-180

Total weight:18.000 kg
Empty weight:ca. 3.920 kg
Bridge size:ca. 5.000 x 2.410 mm
Board height:ca. 800 mm
Top speed:60 Km/h
Base data:
Total weight:18.000 kg
Front weight/Support load:9.000 kg
Rear weight/Axel load:9.000 kg
Empty weight:ca. 3.920 kg
Payload:ca. 14.080 kg
 
Construction:
Bridge size:ca. 5.000 x 2.410 mm
Board height:ca. 800 mm
Pendulum head height:ca. 600 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.350 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:60 Km/h
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Bolt underride protection, galvanized, with separate lighting sources in a protected position on the vehicle frame. Fender bracket and luminaire support in galvanized bolt


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


Brake-connector for second trailer (2-conductor)


Spring parking brake with double release and overload protection valve


4 Wheel compressed air-brake.



Hydraulic connection for the second trailer

Handle about a 3-way gate valve.


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chain of gate with continuous walls (swinging and folding, without loosening the chain)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.



Adjustable by 2.400 mm - 1800 mm



Only in combination with:
- 9180150 Set of tires 385/55 R 22,5 Windpower new


Only in combination with:
- 9180150 Set of tires 385/55 R 22,5 Windpower new


Suspension VB-09/1065/325 with offroad axle regulation.


Suspension VB-09/1065/325 with offroad axle regulation.



Air-suspention-systemfor 9-to. Axle-Load and Heavy Duty spring.


Factory BPW ,instead of the standard ones ADR 406 x 120 mm


Factory BPW, instead of the standard ones ADR 406 x 120 mm


Achse 420 x 180, Spur 2.050 mm, Vkt 150, 10 x M22, MA468 mittig, AGS, Fabrikat ADR (...)

In place of standard axles 406 x 120 mm


Plastic half-shell fender

Per axle, Standard at the rear axle


Plastic single wheel fender

Per axle
only until Forsting 385/65 R 22,5 possible.
Recommended for road transport!


Spring parking brake with double release and overload protection valve


Duomatic-brake connection

In place of standard connections


Duomatic-brake connetion head (motor-vehicle)

In place of standard connections


Automatic load sensing valve (ALB) on both axles




Austrian package consists of : 2-pair 1/4- shell-plasic fender per axis ( and axle units ) ,sight lightingwith outline and positions lights,detechable side protection in left and right

Only for Export. From 40 km /h in Austria required


Austrian package consists of : 2-pair 1/4- shell-plasic fender per axis ( and axle units ) ,sight lightingwith outline and positions lights,detechable side protection in left and right

Per axle, Standard at the rear axle


Continious hydraulic connection for 2nd trailer


Attachment increase to 800 mm

Included chain (attachment gates)


Attachment increase to 800 mm

Included chain (attachment gates)


Slide with hand-lever and lockable pipe-leak

Only tipping with swinging back panel.


Plugged outlet-hopper


Shared central locking system with separating lever on the front wall

For 2-piece side panels, each side of the Trailer!


Spring-help on both sides (2 Springs on each side)


Winch for easy opening gate or attachment gate


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on one side a aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner


Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner (2 pieces)



Sideboards and attatments divided on both sides with removable center posts and 2 x chain tension.


Hydraulic gate-opening with lift cylinder on the right and left


Hydraulic side panel with double-acting cylinders on the front and back walls included 2 throttle valves.

You have to disassambly the mechanik if you want tipping backward.


Aluminum ladder with bracket under platform (8 sprout / lenght 2.400 mm)


250 mm potato slide (overcharge sheet) back over the entire width of the platform


Mechanically opening side panel for pallet loading. Optional left or right


Silage attachment left and right approx. 300 mm high, front and back approx. 250 mm high, with outlet openings for freeflowing material such as vor examble Cereals, Raps etc


Underbody protection in the area of the wheel arches, painted over

RD-180.520

Total weight:18.000 kg
Empty weight:ca. 4.070 kg
Bridge size:ca. 5.000 x 2.410 mm
Board height:ca. 800 mm
Top speed:60 Km/h
Base data:
Total weight:18.000 kg
Front weight/Support load:9.000 kg
Rear weight/Axel load:9.000 kg
Empty weight:ca. 4.070 kg
Payload:ca. 13.930 kg
 
Construction:
Bridge size:ca. 5.000 x 2.410 mm
Board height:ca. 800 mm
Pendulum head height:ca. 600 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.350 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:60 Km/h
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Bolt underride protection, galvanized, with separate lighting sources in a protected position on the vehicle frame. Fender bracket and luminaire support in galvanized bolt


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


Brake-connector for second trailer (2-conductor)


Spring parking brake with double release and overload protection valve


4 Wheel compressed air-brake.



Hydraulic connection for the second trailer

Handle about a 3-way gate valve.


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chain of gate with continuous walls (swinging and folding, without loosening the chain)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.



Adjustable by 2.400 mm - 1800 mm



Only in combination with:
- 9180150 Set of tires 385/55 R 22,5 Windpower new


Only in combination with:
- 9180150 Set of tires 385/55 R 22,5 Windpower new


Suspension VB-09/1065/325 with offroad axle regulation.


Suspension VB-09/1065/325 with offroad axle regulation.



Air-suspention-systemfor 9-to. Axle-Load and Heavy Duty spring.


Factory BPW ,instead of the standard ones ADR 406 x 120 mm


Factory BPW, instead of the standard ones ADR 406 x 120 mm


Achse 420 x 180, Spur 2.050 mm, Vkt 150, 10 x M22, MA468 mittig, AGS, Fabrikat ADR (...)

In place of standard axles 406 x 120 mm


Plastic half-shell fender

Per axle, Standard at the rear axle


Plastic single wheel fender

Per axle
only until Forsting 385/65 R 22,5 possible.
Recommended for road transport!


Spring parking brake with double release and overload protection valve


Duomatic-brake connection

In place of standard connections


Duomatic-brake connetion head (motor-vehicle)

In place of standard connections


Automatic load sensing valve (ALB) on both axles




Austrian package consists of : 2-pair 1/4- shell-plasic fender per axis ( and axle units ) ,sight lightingwith outline and positions lights,detechable side protection in left and right

Only for Export. From 40 km /h in Austria required


Austrian package consists of : 2-pair 1/4- shell-plasic fender per axis ( and axle units ) ,sight lightingwith outline and positions lights,detechable side protection in left and right

Per axle, Standard at the rear axle


Continious hydraulic connection for 2nd trailer


Attachment increase to 800 mm

Included chain (attachment gates)


Attachment increase to 800 mm

Included chain (attachment gates)


Slide with hand-lever and lockable pipe-leak

Only tipping with swinging back panel.


Plugged outlet-hopper


Spring-help on both sides (2 Springs on each side)


Winch for easy opening gate or attachment gate


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on one side a aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner


Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner (2 pieces)



Hydraulic gate-opening with lift cylinder on the right and left


Aluminum ladder with bracket under platform (8 sprout / lenght 2.400 mm)


250 mm potato slide (overcharge sheet) back over the entire width of the platform


Underbody protection in the area of the wheel arches, painted over

RD-180CE

Total weight:18.000 kg
Empty weight:ca. 4.070 kg
Bridge size:ca. 5.000 x 2.410 mm
Board height:ca. 800 mm
Top speed:60 Km/h
Base data:
Total weight:18.000 kg
Front weight/Support load:9.000 kg
Rear weight/Axel load:9.000 kg
Empty weight:ca. 4.070 kg
Payload:ca. 13.930 kg
 
Construction:
Bridge size:ca. 5.000 x 2.410 mm
Board height:ca. 800 mm
Pendulum head height:ca. 600 mm
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.350 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:60 Km/h
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Bolt underride protection, galvanized, with separate lighting sources in a protected position on the vehicle frame. Fender bracket and luminaire support in galvanized bolt


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.


Air-suspention-systemfor 9-to. Axle-Load and Heavy Duty spring.


Achse 420 x 180, Spur 2.050 mm, Vkt 150, 10 x M22, MA468 mittig, AGS, Fabrikat ADR (...)

In place of standard axles 406 x 120 mm


Wheel 10.0/75-15,3 AW 10 PR


Plastic single wheel fender

Per axle
only until Forsting 385/65 R 22,5 possible.
Recommended for road transport!


Brake-connector for second trailer (2-conductor)


Spring parking brake with double release and overload protection valve


ABS brake-system with 12 Volt

instead of 24 Volt


4 Wheel compressed air-brake.


Automatic load sensing valve (ALB) on both axles



Hydraulic connection for the second trailer

Handle about a 3-way gate valve.


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


profiled steel walls and tower,side with pressed on scrubbers and reinforced reinforcement profiles.Site gatesand rear gateswinning and foldingwith central locking system, front gate fixed.Cornering removable.


board wall sealingwith circumferential,replaceable rubber seal, protecdetin the wall panel profile


Chain of gate with continuous walls (swinging and folding, without loosening the chain)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction special-paint "Reisch green-old"


Hestal closer 664 N instead serial closers.


Reflective contour marking tapes - red

Per running meter! For back board only!


Reflective contour marking tapes - white

Per running meter! For back board only!



Adjustable by 2.400 mm - 1800 mm



ABS-connector for second trailer.

Only in combination with:
- 9000030 80 Km/h System


Duomatic-brake connection

In place of standard connections


Duomatic-brake connetion head (motor-vehicle)

In place of standard connections


Abs-Braking system 24-Volt


Lightening-system 24-Volt


Continious hydraulic connection for 2nd trailer


Attachment increase to 800 mm

Included chain (attachment gates)


Attachment increase to 800 mm

Included chain (attachment gates)


Slide with hand-lever and lockable pipe-leak

Only tipping with swinging back panel.


Plugged outlet-hopper


Shared central locking system with separating lever on the front wall

For 2-piece side panels, each side of the Trailer!


Spring-help on both sides (2 Springs on each side)


Winch for easy opening gate or attachment gate


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on one side a aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner


Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner (2 pieces)



Sideboards and attatments divided on both sides with removable center posts and 2 x chain tension.


Aluminum ladder with bracket under platform (8 sprout / lenght 2.400 mm)


Mechanically opening side panel for pallet loading. Optional left or right

RD-180PT

Total weight:18.000 kg
Empty weight:ca. 4.180 kg
Bridge size:ca. 5.200 x 2.410 mm
Top speed:60 Km/h
Base data:
Total weight:18.000 kg
Front weight/Support load:9.000 kg
Rear weight/Axel load:9.000 kg
Empty weight:ca. 4.180 kg
Payload:ca. 13.820 kg
 
Construction:
Bridge size:ca. 5.200 x 2.410 mm
Board height:
Pendulum head height:
Front wall:
Rear wall:
Locking:
Platform height (unloaded):ca. 1.350 mm
Floor thickness:4 mm
Hydraulics:
Lifting force:
Lifting cylinder:
Approx. tilt angle:
 
Build:
Top speed:60 Km/h
Spread:
Brakes:
Rims:
Tyres:
Chassis finish:
Build finish:

Bolt underride protection, galvanized, with separate lighting sources in a protected position on the vehicle frame. Fender bracket and luminaire support in galvanized bolt


Strurdy frame braces cranked in welded constructions


Deflectable bogie with large ball joint




Suspension VB-09/1065/325 with offroad axle regulation.




Wheel 10.0/75-15,3 AW 10 PR


Plastic half-shell fender

Per axle, Standard at the rear axle


Brake-connector for second trailer (2-conductor)


Spring parking brake with double release and overload protection valve


4 Wheel compressed air-brake.



Hydraulic connection for the second trailer

Operation over 3 way stopcock


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off


Hard chrome- plated hydraulic cylinder with lift-valve and shut-off



Shovel with hand lever in the rear gate


Ascending aid on the front gate


Board gate with steel upper belt, Wood- Multiplex Panle with coating on both sides,One-piece zentral locking system, Back gate swingable and foldaple, Front gate fixed,Cornering removable.


All-round profile with replaceable rubber seal.


Sideboards in the right direction of travel with pivoting portal gates, removable corner posts and rod locks.


Side panel hight 1.500 mm


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Chassis-special painting in RAL color specification (with the exception of RAL 9006, not available)


Construction spezial-paint RAL 9006 ALU-white


Construction spezial-paint RAL 9006 ALU-white


Construction special-paint "Reisch green-old"



Only in combination with:
- 9180150 Set of tires 385/55 R 22,5 Windpower new


Only in combination with:
- 9180150 Set of tires 385/55 R 22,5 Windpower new


Suspension VB-09/1065/325 with offroad axle regulation.


Suspension VB-09/1065/325 with offroad axle regulation.



Factory BPW ,instead of the standard ones ADR 406 x 120 mm


Factory BPW, instead of the standard ones ADR 406 x 120 mm


Achse 420 x 180, Spur 2.050 mm, Vkt 150, 10 x M22, MA468 mittig, AGS, Fabrikat ADR (...)

In place of standard axles 406 x 120 mm


Plastic half-shell fender

Per axle, Standard at the rear axle


Plastic single wheel fender

Per Axis
Only until Frosting 385/65 R 22,5 possible


Duomatic-brake connection

In place of standard connections


Duomatic-brake connetion head (motor-vehicle)

In place of standard connections


Automatic load sensing valve (ALB) on both axles




Austrian package consists of : 2-pair 1/4- shell-plasic fender per axis ( and axle units ) ,sight lightingwith outline and positions lights,detechable side protection in left and right

Only for Export. From 40 km /h in Austria required


Austrian package consists of : 2-pair 1/4- shell-plasic fender per axis ( and axle units ) ,sight lightingwith outline and positions lights,detechable side protection in left and right

Per axle, Standard at the rear axle


Continious hydraulic connection for 2nd trailer


Slide with hand lever in the back gate.

On Right in driving directional


Horizontally divided sideoboard gates, 900 mm down, 600 mm up.

On Right in driving directional


Horizontally divided sideoboard gates, 900 mm down, 600 mm up.

On Right in driving directional


Slide with hand-lever and lockable pipe-leak

Tippin operation only possible with oscillating rear gate !


Plugged outlet-hopper


Shared central locking system with separating lever on the front wall

For 2-piece side panels, each side of the Trailer!


PVC tarpaulin body with platform, ladder and complete attachment triangles 300mm, tarpaulin rolled up on both side on an aluminum level with a crank. central bow tarpaulin on both sides fixed on the attachment gates

Only in combination with:
- 9500046 Tarpaulin-attachement on the left side with expander
or
- 9500047 Tarpaulin-attachement on the left side with tarpaulin-band and ratchet spanner


Tarpaulin-attachement on both side with expander (2 pieces)


Aluminum ladder with bracket under platform (8 sprout / lenght 2.400 mm)


250 mm potato slide (overcharge sheet) back over the entire width of the platform


Underbody protection in the area of the wheel arches, painted over